use Boolean instead of boolean

Author: xabbuh

components/config/definition.rst

@@ -13,7 +13,7 @@ Component. Configuration values are usually expected to show some kind of
 hierarchy. Also, values should be of a certain type, be restricted in number
 or be one of a given set of values. For example, the following configuration
 (in YAML) shows a clear hierarchy and some validation rules that should be
-applied to it (like: "the value for ``auto_connect`` must be a boolean value"):
+applied to it (like: "the value for ``auto_connect`` must be a Boolean value"):
 
 .. code-block:: yaml
 
@@ -87,7 +87,7 @@ reflect the real structure of the configuration values::
         ->end()
     ;
 
-The root node itself is an array node, and has children, like the boolean
+The root node itself is an array node, and has children, like the Boolean
 node ``auto_connect`` and the scalar node ``default_connection``. In general:
 after defining a node, a call to ``end()`` takes you one step up in the hierarchy.
 
@@ -98,7 +98,7 @@ It is possible to validate the type of a provided value by using the appropriate
 node definition. Node type are available for:
 
 * scalar
-* boolean
+* Boolean
 * integer (new in 2.2)
 * float (new in 2.2)
 * enum (new in 2.1)

components/config/introduction.rst

@@ -14,7 +14,7 @@ The Config Component
     The ``IniFileLoader`` parses the file contents using the
     :phpfunction:`parse_ini_file` function, therefore, you can only set
     parameters to string values. To set parameters to other data types
-    (e.g. boolean, integer, etc), the other loaders are recommended.
+    (e.g. Boolean, integer, etc), the other loaders are recommended.
 
 Installation
 ------------

components/console/introduction.rst

@@ -289,7 +289,7 @@ Unlike arguments, options are not ordered (meaning you can specify them in any
 order) and are specified with two dashes (e.g. ``--yell`` - you can also
 declare a one-letter shortcut that you can call with a single dash like
 ``-y``). Options are *always* optional, and can be setup to accept a value
-(e.g. ``--dir=src``) or simply as a boolean flag without a value (e.g.
+(e.g. ``--dir=src``) or simply as a Boolean flag without a value (e.g.
 ``--yell``).
 
 .. tip::

components/event_dispatcher/introduction.rst

@@ -474,7 +474,7 @@ be called.
 
 It is possible to detect if an event was stopped by using the
 :method:`Symfony\\Component\\EventDispatcher\\Event::isPropagationStopped` method
-which returns a boolean value::
+which returns a Boolean value::
 
     $dispatcher->dispatch('foo.event', $event);
     if ($event->isPropagationStopped()) {

components/filesystem.rst

@@ -84,7 +84,7 @@ copy
 :method:`Symfony\\Component\\Filesystem\\Filesystem::copy` is used to copy
 files. If the target already exists, the file is copied only if the source
 modification date is later than the target. This behavior can be overridden by
-the third boolean argument::
+the third Boolean argument::
 
     // works only if image-ICC has been modified after image.jpg
     $fs->copy('image-ICC.jpg', 'image.jpg');
@@ -115,7 +115,7 @@ chown
 ~~~~~
 
 :method:`Symfony\\Component\\Filesystem\\Filesystem::chown` is used to change
-the owner of a file. The third argument is a boolean recursive option::
+the owner of a file. The third argument is a Boolean recursive option::
 
     // set the owner of the lolcat video to www-data
     $fs->chown('lolcat.mp4', 'www-data');
@@ -131,7 +131,7 @@ chgrp
 ~~~~~
 
 :method:`Symfony\\Component\\Filesystem\\Filesystem::chgrp` is used to change
-the group of a file. The third argument is a boolean recursive option::
+the group of a file. The third argument is a Boolean recursive option::
 
     // set the group of the lolcat video to nginx
     $fs->chgrp('lolcat.mp4', 'nginx');
@@ -147,7 +147,7 @@ chmod
 ~~~~~
 
 :method:`Symfony\\Component\\Filesystem\\Filesystem::chmod` is used to change
-the mode of a file. The fourth argument is a boolean recursive option::
+the mode of a file. The fourth argument is a Boolean recursive option::
 
     // set the mode of the video to 0600
     $fs->chmod('video.ogg', 0600);
@@ -188,7 +188,7 @@ symlink
 
 :method:`Symfony\\Component\\Filesystem\\Filesystem::symlink` creates a
 symbolic link from the target to the destination. If the filesystem does not
-support symbolic links, a third boolean argument is available::
+support symbolic links, a third Boolean argument is available::
 
     // create a symbolic link
     $fs->symlink('/path/to/source', '/path/to/destination');
@@ -260,7 +260,7 @@ thrown.
 
 .. note::
 
-    Prior to version 2.1, ``mkdir`` returned a boolean and did not throw
+    Prior to version 2.1, ``mkdir`` returned a Boolean and did not throw
     exceptions. As of 2.1, a
     :class:`Symfony\\Component\\Filesystem\\Exception\\IOException` is thrown
     if a directory creation fails.

components/yaml/introduction.rst

@@ -69,7 +69,7 @@ Types Support
 ~~~~~~~~~~~~~
 
 It supports most of the YAML built-in types like dates, integers, octals,
-booleans, and much more...
+Booleans, and much more...
 
 Full Merge Key Support
 ~~~~~~~~~~~~~~~~~~~~~~

components/yaml/yaml_format.rst

@@ -12,7 +12,7 @@ chapter only describes the minimum set of features needed to use YAML as a
 configuration file format.
 
 YAML is a simple language that describes data. As PHP, it has a syntax for
-simple types like strings, booleans, floats, or integers. But unlike PHP, it
+simple types like strings, Booleans, floats, or integers. But unlike PHP, it
 makes a difference between arrays (sequences) and hashes (mappings).
 
 Scalars

contributing/code/bc.rst

@@ -330,7 +330,7 @@ Turn static into non static                         No              No
        ===================  ==================================================================
        Original Type        New Type
        ===================  ==================================================================
-       boolean              any `scalar type`_ with equivalent `boolean values`_
+       Boolean              any `scalar type`_ with equivalent `Boolean values`_
        string               any `scalar type`_ or object with equivalent `string values`_
        integer              any `scalar type`_ with equivalent `integer values`_
        float                any `scalar type`_ with equivalent `float values`_
@@ -344,7 +344,7 @@ Turn static into non static                         No              No
        ===================  ==================================================================
        Original Type        New Type
        ===================  ==================================================================
-       boolean              any `scalar type`_ with equivalent `boolean values`_
+       Boolean              any `scalar type`_ with equivalent `Boolean values`_
        string               any `scalar type`_ or object with equivalent `string values`_
        integer              any `scalar type`_ with equivalent `integer values`_
        float                any `scalar type`_ with equivalent `float values`_
@@ -364,7 +364,7 @@ Turn static into non static                         No              No
 
 .. _Semantic Versioning: http://semver.org/
 .. _scalar type: http://php.net/manual/en/function.is-scalar.php
-.. _boolean values: http://php.net/manual/en/function.boolval.php
+.. _Boolean values: http://php.net/manual/en/function.boolval.php
 .. _string values: http://www.php.net/manual/en/function.strval.php
 .. _integer values: http://www.php.net/manual/en/function.intval.php
 .. _float values: http://www.php.net/manual/en/function.floatval.php

cookbook/configuration/configuration_organization.rst

@@ -265,7 +265,7 @@ format (``.yml``, ``.xml``, ``.php``, ``.ini``):
     The ``IniFileLoader`` parses the file contents using the
     :phpfunction:`parse_ini_file` function. Therefore, you can only set
     parameters to string values. Use one of the other loaders if you want
-    to use other data types (e.g. boolean, integer, etc.).
+    to use other data types (e.g. Boolean, integer, etc.).
 
 If you use any other configuration format, you have to define your own loader
 class extending it from :class:`Symfony\\Component\\DependencyInjection\\Loader\\FileLoader`.

cookbook/form/unit_testing.rst

@@ -184,7 +184,7 @@ on other extensions. You need add those extensions to the factory object::
         protected function setUp()
         {
             parent::setUp();
-            
+
             $validator = $this->getMock('\Symfony\Component\Validator\ValidatorInterface');
             $validator->method('validate')->will($this->returnValue(new ConstraintViolationList()));
 
@@ -261,7 +261,7 @@ The code above will run your test three times with 3 different sets of
 data. This allows for decoupling the test fixtures from the tests and
 easily testing against multiple sets of data.
 
-You can also pass another argument, such as a boolean if the form has to
+You can also pass another argument, such as a Boolean if the form has to
 be synchronized with the given set of data or not etc.
 
 .. _`data providers`: http://www.phpunit.de/manual/current/en/writing-tests-for-phpunit.html#writing-tests-for-phpunit.data-providers

cookbook/security/entity_provider.rst

@@ -456,7 +456,7 @@ interface adds four extra methods to validate the account status:
   checks whether the user is enabled.
 
 For this example, the first three methods will return ``true`` whereas the
-``isEnabled()`` method will return the boolean value in the ``isActive`` field.
+``isEnabled()`` method will return the Boolean value in the ``isActive`` field.
 
 .. code-block:: php
 

reference/configuration/framework.rst

@@ -330,7 +330,7 @@ serializer
 enabled
 .......
 
-**type**: ``boolean`` **default**: ``false``
+**type**: ``Boolean`` **default**: ``false``
 
 Whether to enable the ``serializer`` service or not in the service container.
 
@@ -504,7 +504,7 @@ translator
 enabled
 .......
 
-**type**: ``boolean`` **default**: ``false``
+**type**: ``Boolean`` **default**: ``false``
 
 Whether or not to enable the ``translator`` service in the service container.
 

reference/constraints/Isbn.rst

@@ -106,15 +106,15 @@ Available Options
 isbn10
 ~~~~~~
 
-**type**: ``boolean``
+**type**: ``Boolean`` **default**: ``false``
 
 If this required option is set to ``true`` the constraint will check if the
 code is a valid ISBN-10 code.
 
 isbn13
 ~~~~~~
 
-**type**: ``boolean``
+**type**: ``Boolean`` **default**: ``false``
 
 If this required option is set to ``true`` the constraint will check if the
 code is a valid ISBN-13 code.

reference/constraints/Valid.rst

@@ -261,7 +261,7 @@ Options
 traverse
 ~~~~~~~~
 
-**type**: ``boolean`` **default**: ``true``
+**type**: ``Boolean`` **default**: ``true``
 
 If this constraint is applied to a property that holds an array of objects,
 then each object in that array will be validated only if this option is set
@@ -270,7 +270,7 @@ to ``true``.
 deep
 ~~~~
 
-**type**: ``boolean`` **default**: ``false``
+**type**: ``Boolean`` **default**: ``false``
 
 If this constraint is applied to a property that holds an array of objects,
 then each object in that array will be validated recursively if this option is set

reference/forms/types/choice.rst

@@ -96,7 +96,7 @@ is the item value and the array value is the item's label::
 .. tip::
 
     When the values to choose from are not integers or strings (but e.g. floats
-    or booleans), you should use the `choice_list`_ option instead. With this
+    or Booleans), you should use the `choice_list`_ option instead. With this
     option you are able to keep the original data format which is important
     to ensure that the user input is validated properly and useless database
     updates caused by a data type mismatch are avoided.
@@ -136,7 +136,7 @@ Overridden Options
 compound
 ~~~~~~~~
 
-**type**: ``boolean`` **default**: same value as ``expanded`` option
+**type**: ``Boolean`` **default**: same value as ``expanded`` option
 
 This option specifies if a form is compound. The value is by default
 overridden by the value of the ``expanded`` option.
@@ -156,7 +156,7 @@ The actual default value of this option depends on other field options:
 error_bubbling
 ~~~~~~~~~~~~~~
 
-**type**: ``boolean`` **default**: ``false``
+**type**: ``Boolean`` **default**: ``false``
 
 Set that error on this field must be attached to the field instead of
 the parent field (the form in most cases).

reference/forms/types/options/auto_initialize.rst.inc

@@ -1,7 +1,7 @@
 auto_initialize
 ~~~~~~~~~~~~~~~
 
-**type**: ``boolean``  **default**: ``true``
+**type**: ``Boolean``  **default**: ``true``
 
 An internal option: sets whether the form should be initialized automatically.
 For all fields, this option should only be ``true`` for root forms. You won't

reference/forms/types/options/button_disabled.rst.inc

@@ -1,7 +1,7 @@
 disabled
 ~~~~~~~~
 
-**type**: ``boolean``  **default**: ``false``
+**type**: ``Boolean``  **default**: ``false``
 
 If you don't want a user to be able to click a button, you can set the disabled
 option to true. It will not be possible to submit the form with this button,

reference/forms/types/options/checkbox_compound.rst.inc

@@ -1,7 +1,7 @@
 compound
 ~~~~~~~~
 
-**type**: ``boolean`` **default**: ``false``
+**type**: ``Boolean`` **default**: ``false``
 
 This option specifies if a form is compound. As it's not the case for checkbox,
 by default the value is overridden with the ``false`` value.

reference/forms/types/options/compound.rst.inc

@@ -1,7 +1,7 @@
 compound
 ~~~~~~~~
 
-**type**: ``boolean`` **default**: ``true``
+**type**: ``Boolean`` **default**: ``true``
 
 This option specifies if a form is compound. This is independent of whether the
 form actually has children. A form can be compound but not have any children

reference/forms/types/options/disabled.rst.inc

@@ -4,7 +4,7 @@ disabled
 .. versionadded:: 2.1
     The ``disabled`` option was introduced in Symfony 2.1.
 
-**type**: ``boolean``  **default**: ``false``
+**type**: ``Boolean``  **default**: ``false``
 
 If you don't want a user to modify the value of a field, you can set the disabled
 option to true. Any submitted value will be ignored.

reference/forms/types/options/inherit_data.rst.inc

@@ -5,7 +5,7 @@ inherit_data
     The ``inherit_data`` option was introduced in Symfony 2.3. Before, it
     was known as ``virtual``.
 
-**type**: ``boolean`` **default**: ``false``
+**type**: ``Boolean`` **default**: ``false``
 
 This option determines if the form will inherit data from its parent form.
 This can be useful if you have a set of fields that are duplicated across

reference/forms/types/options/mapped.rst.inc

@@ -1,7 +1,7 @@
 mapped
 ~~~~~~
 
-**type**: ``boolean``  **default**: ``true``
+**type**: ``Boolean``  **default**: ``true``
 
 If you wish the field to be ignored when reading or writing to the object, you
 can set the ``mapped`` option to ``false``.

reference/twig_reference.rst

@@ -334,7 +334,7 @@ path
 ``parameters``
     **type**: ``array`` **default**: ``[]``
 ``relative``
-    **type**: ``boolean`` **default**: ``false``
+    **type**: ``Boolean`` **default**: ``false``
 
 Returns the relative URL (without the scheme and host) for the given route. If
 ``relative`` is enabled, it'll create a path relative to the current path. More
@@ -352,7 +352,7 @@ url
 ``parameters``
     **type**: ``array`` **default**: ``[]``
 ``schemeRelative``
-    **type**: ``boolean`` **default**: ``false``
+    **type**: ``Boolean`` **default**: ``false``
 
 Returns the absolute URL (with scheme and host) for the given route. If
 ``schemeRelative`` is enabled, it'll create a scheme-relative URL. More
@@ -431,7 +431,7 @@ yaml_encode
 ``inline``
     **type**: ``integer`` **default**: ``0``
 ``dumpObjects``
-    **type**: ``boolean`` **default**: ``false``
+    **type**: ``Boolean`` **default**: ``false``
 
 Transforms the input into YAML syntax. See :ref:`components-yaml-dump` for more
 information.
@@ -448,7 +448,7 @@ yaml_dump
 ``inline``
     **type**: ``integer`` **default**: ``0``
 ``dumpObjects``
-    **type**: ``boolean`` **default**: ``false``
+    **type**: ``Boolean`` **default**: ``false``
 
 Does the same as `yaml_encode() <yaml_encode>`_, but includes the type in the output.