use tusb_config from arduino_tinyusb

Author: hathach

libraries/Adafruit_TinyUSB_Arduino/examples/MassStorage/msc_external_flash_sdcard/msc_external_flash_sdcard.ino

@@ -109,7 +109,7 @@ void setup()
   }
 
   Serial.begin(115200);
-  while ( !Serial ) delay(10);   // wait for native usb
+  //while ( !Serial ) delay(10);   // wait for native usb
 
   Serial.println("Adafruit TinyUSB Mass Storage External Flash + SD Card example");
   delay(1000);

libraries/Adafruit_TinyUSB_Arduino/examples/MassStorage/msc_ramdisk/msc_ramdisk.ino

@@ -36,7 +36,7 @@ void setup()
   usb_msc.begin();
 
   Serial.begin(115200);
-  while ( !Serial ) delay(10);   // wait for native usb
+  //while ( !Serial ) delay(10);   // wait for native usb
 
   Serial.println("Adafruit TinyUSB Mass Storage RAM Disk example");
 }

libraries/Adafruit_TinyUSB_Arduino/examples/MassStorage/msc_ramdisk_dual/msc_ramdisk_dual.ino

@@ -38,7 +38,7 @@ void setup()
   usb_msc.begin();
 
   Serial.begin(115200);
-  while ( !Serial ) delay(10);   // wait for native usb
+  //while ( !Serial ) delay(10);   // wait for native usb
 
   Serial.println("Adafruit TinyUSB Mass Storage Dual RAM Disks example");
 }

libraries/Adafruit_TinyUSB_Arduino/examples/MassStorage/msc_sd/msc_sd.ino

@@ -38,7 +38,7 @@ void setup()
   usb_msc.begin();
 
   Serial.begin(115200);
-  while ( !Serial ) delay(10);   // wait for native usb
+  //while ( !Serial ) delay(10);   // wait for native usb
 
   Serial.println("Adafruit TinyUSB Mass Storage SD Card example");
 

libraries/Adafruit_TinyUSB_Arduino/examples/MassStorage/msc_sdfat/msc_sdfat.ino

@@ -48,7 +48,7 @@ void setup()
   usb_msc.begin();
 
   Serial.begin(115200);
-  while ( !Serial ) delay(10);   // wait for native usb
+  //while ( !Serial ) delay(10);   // wait for native usb
 
   Serial.println("Adafruit TinyUSB Mass Storage SD Card example");
 

libraries/Adafruit_TinyUSB_Arduino/src/arduino/Adafruit_USBD_Device.cpp

@@ -470,4 +470,11 @@ static int strcpy_utf16(const char *s, uint16_t *buf, int bufsize) {
   return buflen;
 }
 
+// TODO just for compiling, will move to DFU specific file
+#if CFG_TUD_DFU_RUNTIME
+void tud_dfu_runtime_reboot_to_dfu_cb(void) {
+  // TinyUSB_Port_EnterDFU();
+}
+#endif
+
 #endif // TUSB_OPT_DEVICE_ENABLED

libraries/Adafruit_TinyUSB_Arduino/src/tusb_config.h

@@ -39,7 +39,8 @@
   #include "arduino/ports/rp2040/tusb_config_rp2040.h"
 
 #elif defined(ARDUINO_ARCH_ESP32)
-  #include "arduino/ports/esp32/tusb_config_esp32.h"
+  // Use the BSP sdk/include/arduino_tinyusb/include/tusb_config.h
+  #include <tusb_config.h>
 
 #else
   #error TinyUSB Arduino Library does not support your core yet