OTAUsage.ino

/*
 This sketch can be used to generate an example binary that can be uploaded to Portenta C33 via OTA.
 It needs to be used together with UpdateFromFile.ino

 Steps to test OTA on Portenta C33:
 1) Upload this sketch or any other sketch (this one lights up the RGB LED with different colours).
 2) In the IDE select: Sketch -> Export compiled Binary
 3) Upload the exported binary to a server
 4) Open the related OTA_*_Portenta.ino sketch, eventually update the OTA_FILE_LOCATION
 5) Upload the sketch UpdateFromFile.ino to perform OTA
*/
#include "SFU.h"

void setLed(int blue, int gree, int red) {
  if (blue == 1) {
    digitalWrite(LEDB, LOW);
  }
  else {
    digitalWrite(LEDB, HIGH);
  }

  if (gree == 1) {
    digitalWrite(LEDG, LOW);
  }
  else {
    digitalWrite(LEDG, HIGH);
  }

  if (red == 1) {
    digitalWrite(LEDR, LOW);
  }
  else {
    digitalWrite(LEDR, HIGH);
  }
}


void setup()
{
  pinMode(LEDB, OUTPUT);
  pinMode(LEDG, OUTPUT);
  pinMode(LEDR, OUTPUT);
}

void loop()
{ // Blue LED on
  setLed(1, 0, 0);
  delay(1000);
  // Green LED on
  setLed(0, 1, 0);
  delay(1000);
  // Red LED on
  setLed(0, 0, 1);
  delay(1000);
}